Users Guide

Layer 2 Switching Commands 318
Command Mode
User Exec, Privileged Exec mode, Global Configuration mode and all
Configuration submodes
User Guidelines
This command has no user guidelines.
Example
In this example, all dynamic entries in the mac address-table are displayed.
console#show mac address-table dynamic
Aging time is 300 Sec
Vlan Mac Address Type Port
---- -------------- ------- -------------
1 0000.0001.0000 Dynamic Gi1/0/1
1 0000.8420.5010 Dynamic Gi1/0/1
1 0000.E26D.2C2A Dynamic Gi1/0/1
1 0000.E89A.596E Dynamic Gi1/0/1
1 0001.02F1.0B33 Dynamic Gi1/0/1
show mac address-table interface
Use the show mac address-table command in User Exec or Privileged Exec
mode to display all entries in the mac address-table.
Syntax
show mac address-table interface interface-id [vlan vlan-id]
• interface-id — Specify an interface type.Valid interfaces include Ethernet ports
and port channels.
• vlan-id — Specify a valid VLAN. The range is 1 to 4093.
Default Configuration
This command has no default configuration.
Command Mode
User Exec, Privileged Exec mode, Global Configuration mode and all
Configuration submodes