Users Guide

Layer 2 Switching Commands 326
Gi1/0/16 Disabled 6
Gi1/0/17 Disabled 6
Gi1/0/18 Disabled 6
Gi1/0/19 Disabled 6
Gi1/0/20 Disabled 6
Gi1/0/21 Disabled 6
Gi1/0/22 Disabled 6
Gi1/0/23 Disabled 6
Gi1/0/24 Disabled 6
Po1 Disabled 6
Po2 Disabled 6
Po3 Disabled 6
Po4 Disabled 6
Po5 Disabled 6
Po6 Disabled 6
Po7 Disabled 6
Po8 Disabled 6
Po9 Disabled 6
Po10 Disabled 6
Po11 Disabled 6
Po12 Disabled 6
Po13 Disabled 6
Po14 Disabled 6
Po15 Disabled 6
The following example shows command output when a port is specified:
console#show switchport voice gigabitethernet 1/0/1
Interface Auto VoIP Mode Traffic Class
--------- -------------- -------------
Gi1/0/1 Disabled 6
The command output provides the following information:
• AutoVoIP Mode—The Auto VoIP mode on the interface.
• Traffic Class—The Cos Queue or Traffic Class to which all VoIP traffic is
mapped. This is not configurable and defaults to the highest COS queue
available in the system for data traffic.