Users Guide

Layer 2 Switching Commands 340
• vlan-list —A list of VLAN IDs. List separate, non-consecutive VLAN IDs
separated by commas (without spaces). Use a hyphen to designate a range
of IDs. (Range: 1–4093)
Default Configuration
Setting the DHCP Option 82 Circuit ID is disabled by default.
Command Mode
Global Configuration
User Guidelines
There are no user guidelines for this command.
Example
console(config)#dhcp l2relay circuit-id vlan 340-350
dhcp l2relay remote-id
Use the dhcp l2relay remote-id command to enable setting the DHCP
Option 82 Remote ID for a VLAN. When enabled, the supplied string is used
for the Remote ID in DHCP Option 82. Use the no form of this command to
disable setting the DHCP Option 82 Remote ID.
Syntax
dhcp l2relay remote-id remoteId vlan vlan-list
no dhcp l2relay remote-id vlan vlan-list
• remoteId — The string to be used as the remote ID in the Option 82 (Range: 1 -
128 characters).
• vlan-list —A list of VLAN IDs. List separate, non-consecutive VLAN IDs
separated by commas (without spaces). Use a hyphen to designate a range
of IDs. (Range: 1–4093)
Default Configuration
Setting the DHCP Option 82 Remote ID is disabled by default.