Users Guide

Layer 2 Switching Commands 374
Command Modes
User Exec, Privileged Exec (all show modes)
User Guidelines
This command has no user guidelines.
Example
(console)#show ipv6 dhcp snooping
DHCP snooping is Disabled
DHCP snooping source MAC verification is enabled
DHCP snooping is enabled on the following VLANs:
11 - 30, 40
Interface Trusted Log Invalid Pkts
--------- -------- ----------------
Gi1/0/1 Yes No
Gi1/0/2 No Yes
Gi1/0/3 No Yes
Gi1/0/4 No No
Gi1/0/6 No No
show ipv6 dhcp snooping binding
Use the show ipv6 dhcp snooping binding command to display the IPv6
DHCP snooping configuration
Syntax
show ipv6 dhcp snooping binding [{static|dynamic}] [interface interface-id
| port-channel port-channel-number] [vlan vlan-id]
• static—Only show static entries.
• dynamic—Only show dynamic entries.
• interface-id—Limit the display to entries associated with Ethernet
interface-id.
• vlan-id—Limit the display to entries associated with VLAN vlan-id.
• port-channel-number—Limit the display to entries associated with the
identified port channel.