Users Guide

Layer 2 Switching Commands 449
• mac-addr— The destination MAC address for which the connectivity needs to
be verified. Either MEP ID or the MAC address option can be used.
• remote-mpid— The MEP ID for which connectivity is to be verified; i.e. the
destination MEP ID.
• domain— Name of the maintenance domain (an alphanumeric string of up to
43 characters in length).
• vlan-id— A VLAN associated with the maintenance domain. Range: 1-4093.
• mpid— The MEP ID from which the loopback message needs to be
transmitted.
• ttl— The number of hops over which the LTM is expected to be transmitted.
The default number is 64.
Default Configuration
By default, the traceroute command will send loopback trace messages with a
TTL of 64.
Command Mode
Privileged Exec
User Guidelines
This command has no user guidelines.
Example
console # traceroute ethernet cfm remote-mpid 32 level 7 vlan 11 mpid 12
show ethernet cfm errors
Use the show ethernet cfm errors command to display the cfm errors.
Syntax
show ethernet cfm errors {domain domain-id | level 0-7}
• level—Maintenance association level
• domain—Name of the maintenance domain (an alphanumeric string of
up to 43 characters in length).