Users Guide

Layer 2 Switching Commands 478
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Global Configuration mode, and all Configuration
submodes
User Guidelines
The following fields are displayed:
Example
console#show ethernet ring g8032 brief ring1 instance 1
R: Interface is the RPL-link
F: Interface is faulty
B: Interface is blocked
UB: Interface is unblocked
FS: Local forced switch
MS: Local manual switch
RingName Inst NodeType NodeState Port0 Port1
--------------------------------------------------------------------------
ring1 1 Owner Idle R,B
Command History
Command introduced in firmware release 6.6.1.
Table 3-4. show ethernet ring g8032 brief command output
Field Description
RingName Ethernet ring name
Instance Instance Identifier
Node Type Ring node role (Owner, Neighbor, or None)
Node State State of the ring node (Init, Idle, Protection, Pending,
ForcedSwitch, and ManualSwitch).
Port0 State of the interface for handling data traffic.
Port1 State of the interface for handling data traffic.