Users Guide

Layer 2 Switching Commands 479
show ethernet ring g8032 status
Use the show ethernet ring g8032 status command to show the status of
Ethernet ring protection.
Syntax
show ethernet ring g8032 status [ring-name] [ instance [instance-id]]
• ring-name —The Ethernet ring name.
• instance-id —The Ethernet ring instance.
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Global Configuration mode, and all Configuration
submodes
User Guidelines
The following fields are displayed:
Table 3-5. show ethernet ring g8032 status command output
Field Description
Ethernet Ring Ethernet ring name
Instance Instance Identifier
Node Type Ring node role (Owner, Neighbor, or None)
Node State State of the ring node (Init, Idle, Protection, Pending,
ForcedSwitch, and ManualSwitch).
Port0 Ethernet ring link interface number
APS-Channel R-APS VLAN
Status Status displays whether the interface is the RPL, and
whether the interface has been blocked.
Remote R-APS The node ID and Blocked port reference pair that is last
received on the ring port.