Users Guide

Layer 2 Switching Commands 484
console#show ethernet ring g8032 profile p1
Ethernet ring profile name..................... p1
WTR interval................................. 8 minutes
Guard interval............................... 30 milliseconds
Holdoff interval............................. 0 milliseconds
Revertive mode............................... Disabled
Command History
Command introduced in firmware release 6.6.1.
show ethernet ring g8032 statistics
Use the show ethernet ring g8032 statistics command to show the status of
Ethernet ring protection.
Syntax
show ethernet ring g8032 statistics [ring-name] [ instance [instance-id]]
• ring-name —The Ethernet ring name.
• instance-id —The Ethernet ring instance.
Default Configuration
If no ring or instance is given, all rings and instances are displayed.
Command Mode
Privileged Exec mode, Global Configuration mode, and all Configuration
submodes
User Guidelines
The following fields are displayed:
• FOP PM detected – Failure Of Protocol – Provisioning Mismatch
• FOP TO detected – Failure Of Protocol – Time Out
The following R-APS message counts are displayed for both Port0 and Port1:
• NR —R-APS no request
• NR,RB —R-APS no request, RPL blocked