Users Guide

Layer 2 Switching Commands 510
Syntax
gvrp vlan-creation-forbid
no gvrp vlan-creation-forbid
Default Configuration
By default, dynamic VLAN creation is enabled.
Command Mode
Interface Configuration (gigabitethernet, port-channel, tengigabitethernet,
fortygigabitethernet) mode
User Guidelines
This command is available in Ethernet interface configuration mode and port
channel interface configuration mode.
Example
The following example disables dynamic VLAN creation on port 1/0/8.
console(config)#interface gigabitethernet 1/0/8
console(config-if-Gi1/0/8)#gvrp vlan-creation-forbid
show gvrp configuration
Use the show gvrp configuration command to display GVRP configuration
information. Timer values are displayed. Other data shows whether GVRP is
enabled and which ports are running GVRP.
Syntax
show gvrp configuration [ interface-id ]
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes