Users Guide

Layer 2 Switching Commands 553
• mac mac-address —Clears the entries matching the mac-address.
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged Exec mode
User Guidelines
After clearing the table entries, ARP probes are sent to repopulate the table.
Command History
Command introduced in version 6.6.0 firmware.
Example
This example clears the IPDT entries on interface Gi1/0/1.
console#clear ip device tracking interface gi1/0/1
show ip device tracking
Use the show ip device tracking command to display entries in the IP device
tracking table.
Syntax
show ip device tracking {all [active | inactive | count ] | interface if-name |
ip ipv4-address | mac mac-address}
• all—Displays the entire IPDT table.
• active—(Optional) Display only the ACTIVE status entries.
• inactive—(Optional) Display only the INACTIVE status entries.
• count—(Optional) Display the sum of each type of table entry.
• interface if-name —Display the entries matching the host ipv4-address
parameter.
• mac mac-address —Display the entries matching the MAC address
parameter.