Users Guide

Layer 2 Switching Commands 570
• vlan-id — A VLAN identifier (Range 1-4093).
• time — MLD group membership interval time in seconds. (Range: 2-
3600)
Default Configuration
The default group membership interval time is 260 seconds.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
console(config)#ipv6 mld snooping vlan 2 groupmembership-interval 1500
ipv6 mld snooping vlan immediate-leave
This command enables or disables MLD Snooping immediate-leave mode on
a selected VLAN.
Syntax
ipv6 mld snooping vlan vlan-id immediate-leave
• vlan-id— A VLAN identifier (Range 1-4093).
Default Configuration
Immediate leave is disabled on all VLANs by default.
Command Mode
Global Configuration mode.