Users Guide

Layer 2 Switching Commands 573
ipv6 mld snooping vlan mcrtrexpiretime
The ipv6 mld snooping mcrtrexpiretime command sets the multicast router
present expiration time.
Syntax
ipv6 mld snooping vlan vlan-id mcrtrexpiretime time
no ipv6 mld snooping vlan vlan-id mcrtrexpiretime
• vlan-id — A VLAN identifier (Range 1-4093).
• time — Multicast router present expiration time in seconds. (Range: 1–
3600)
Default Configuration
The default multicast router present expiration time is 300 seconds.
Command Mode
Global Configuration mode.
User Guidelines
The time is set for a particular interface or VLAN. This is the amount of time
in seconds that a switch waits for a query to be received on an interface before
the interface is removed from the list of interfaces with multicast routers
attached. The range is 1 to 3600 seconds.
Example
console(config)#ipv6 mld snooping vlan 2 mcrtrexpiretime 1500
ipv6 mld snooping vlan mrouter
This command statically configures a port as connected to a multicast router
for a specified VLAN. The no form of this command removes the static
binding.
Syntax
ipv6 mld snooping vlan vlan-id mrouter interface interface
no ipv6 mld snooping vlan vlan-id mrouter interface interface