Users Guide

Layer 2 Switching Commands 632
Command History
Implemented in version 6.3.0.1 firmware. Example updated in 6.4 version.
Example
console#show keepalive
Keepalive Service.............................. Enabled
Transmit Interval.............................. 10
Retry Count.................................... 3
show keepalive statistics
Use the show keepalive statistics command to display the loop protect status
for one or all interfaces.
Syntax
show keepalive statistics {interface-id | all}
• interface-id — Displays the statistics for the specified Ethernet (Physical)
interface.
• all — Displays statistics for all interfaces.
Default Configuration
There is no default configuration.
Command Mode
Privileged Exec mode and all configuration sub modes
User Guidelines
The following information is displayed.
Field Description
Port The interface identifier.
Keep Alive Are keepalives transmitted on this interface (Yes,
No)?
Loop Detected Has a loop been detected (Yes, No)?