Users Guide

Layer 2 Switching Commands 684
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec, Global Configuration mode and all Configuration submodes
User Guidelines
The command displays the following information.
Example #1
console#show interfaces port-channel 1
Channel Ports Ch-Type Hash Type Min-links Local Prf
------- ----------------------------- -------- ---------- --------- --------
Po1 Inactive: Gi1/0/1, Gi1/0/2, Dynamic 3 1 Enabled
Gi1/0/3, Gi1/0/4
Hash Algorithm Type
1 - Source MAC, VLAN, EtherType, source module and port ID
2 - Destination MAC, VLAN, EtherType, source module and port ID
3 - Source IP and source TCP/UDP port
4 - Destination IP and destination TCP/UDP port
5 - Source/Destination MAC, VLAN, EtherType, source MODID/port
6 - Source/Destination IP and source/destination TCP/UDP port
7 - Enhanced hashing mode
Parameter Description
Channel Number of the port channel to show. This parameter is
optional. If the port channel number is not given, all the
channel groups are displayed. (Range: Valid port-channel
number, 1 to 48).
• Ports—The ports that are members of the port-channel.
• Ch-Type—The aggregation scheme. Dynamic indicates that
the LACP protocol is run.
• Hash Algorithm Type—The hashing used to assign a
conversation to a particular aggregation link.
•
Local Prf — An additional field added to support the display
of the local preference.