Users Guide

Layer 2 Switching Commands 882
Syntax
switchport private-vlan {host-association primary-vlan-id secondary-vlan-id|
mapping primary-vlan-id {add|remove} secondary-vlan-list} | mapping
trunk primary-vlan-id { secondary-vlan-list | add secondary-vlan-list |
remove secondary-vlan-list } | trunk { native vlan vlan-if | allowed vlan vlan-
list } | association trunk primary-vlan-id secondary-vlan-id}
no switchport private-vlan {host-association|mapping | mapping trunk
primary-vlan-id | trunk allowed vlan-list | trunk native vlan vlan-id |
association trunk primary-vlan-id secondary-vlan-id}}
no switchport private-vlan mapping trunk
no switchport private-vlan trunk allowed vlan vlan-list
no switchport private-vlan trunk native vlan vlan-id
no switchport private-vlan association trunk [ primary-vlan-id ]
no switchport private-vlan {host-association|mapping}
• host-association—Defines VLAN associations for community or host
ports.
• mapping—Defines the private VLAN mapping for promiscuous ports.
• primary-vlan-id—Primary VLAN ID of a private VLAN.
• secondary-vlan-id—Secondary (isolated or community) VLAN ID of a
private VLAN.
• add—Associates the secondary VLAN with the primary one.
• remove—Deletes the secondary VLANs from the primary VLAN
association.
• secondary-vlan-list—A list of secondary VLANs to be mapped to a primary
VLAN.
• mapping trunk—Maps the port to a primary VLAN and selected
secondary VLANs.
• trunk native vlan—Defines the VLAN association for untagged packets on
a trunk mode port. If not configured, untagged packets are dropped.
• trunk allowed vlan—Specifies the allowed normal VLANs on the trunk
port.