Users Guide

Layer 2 Switching Commands 910
Example
This example clears the MVRP counters on port channel 1
console#clear mmrp statistics po1
mvrp
This command enables MVRP on a specific interface. Use the no form of the
command to disable MVRP on an interface.
Syntax
mvrp
no mvrp
Default Configuration
By default, MVRP is disabled globally and on all interfaces.
Command Mode
Interface Configuration (Ethernet and port channel) and Interface Range
(Ethernet and port channel)
User Guidelines
MVRP is not compatible with GVRP/GMRP. Do not enable MVRP on
switches enabled for GVRP/GMRP.
MVRP operates in dynamic mode only. It both propagates VLAN
configuration and learns (and creates) VLANs learned from the link peer.
Enabling MVRP on a port channel associated interface has no effect as long
as the interface is a member of the port channel.
MVRP is not compatible with private VLAN configured interfaces. Do not
enable GVRP on private VLAN enabled interfaces.
MVRP must also be enabled globally in order to become operational.
Command History
Introduced in version 6.2.0.1 firmware.