Users Guide

Layer 2 Switching Commands 913
Command History
Introduced in version 6.2.0.1 firmware.
Example
This example enables the MVRP periodic state machine.
console(config)#mvrp periodic state machine
show mvrp
Use this command to display the MVRP configuration for an interface or
globally.
Syntax
show mvrp [ summary | interface [ interface-id | summary ] ]
• summary—Show the global MMRP configuration.
• interface-id—Show the MMRP configuration for the specified interface.
• interface summary—Show the per interface MMRP configuration for all
interfaces.
Default Configuration
This command has no defaults.
Command Mode
Privileged Exec, Global Configuration, and all submodes
User Guidelines
MVRP is not compatible with GMRP. Do not enable GMRP/GVRP on MVRP
enabled switches.
Command History
Introduced in version 6.2.0.1 firmware.
Example
The following shows example CLI display output for the command.