Users Guide

Layer 2 Switching Commands 914
console#show mvrp summary
MVRP global state.............................. Disabled
MVRP Periodic State Machine state.............. Disabled
VLANs created via MVRP......................... 20-45, 3001-3050
The following shows example CLI display output for the command.
(Switching) #show mvrp interface 0/12
MVRP interface state........................... Enabled
VLANs declared................................. 20-45, 3001-3050
VLANs registered............................... none
show mvrp statistics
Use this command to display the MVRP statistics for an interface or globally.
Syntax
show mvrp statistics {interface-id}
• interface-id—Displays the MVRP statistics for the specified interface.
Default Configuration
By default, the global statistics are displayed.
Command Mode
Privileged Exec, Global Configuration, and all submodes
User Guidelines
MVRP is not compatible with GMRP/GVRP. Do not enable GVRP on MMRP
enabled switches.
Command History
Introduced in version 6.2.0.1 firmware.
Example
The following shows example CLI display output for the command.
console#show mvrp statistics summary
MVRP messages received......................... 45