Users Guide

Security Commands 945
console(config)# authentication command bounce-port ignore
The following example sets the switch to ignore CoA disable host port
commands.
console(config)# authentication command disable-port ignore
authentication critical recovery
Use the authentication critical recovery command to control the load placed
on RADIUS servers.
Syntax
authentication critical recovery max-reauth number-of-clients
no authentication critical recovery max-reauth number-of-clients
• number-of-clients —The maximum number of 802.1X supplicants that
will be re-authenticated per second. Range 1 to 50 clients.
Default Configuration
By default, the maximum number of clients that are processed for
reauthentication is 10 per second.
Command Mode
Global Configuration mode
User Guidelines
This command configures the number of supplicants that are re-
authenticated per second. This configuration is for the entire system across
all the supplicants on all ports. This is used to control the system and network
load when the number of supplicants to be re-authenticated is large. These
re-authentications can be triggered due to reinitialize dead or alive server
actions.
Command History
Syntax added in version 6.6 firmware.