Users Guide

Security Commands 946
Example
The following example sets the switch to rate limit reauthentication requests
to 20 per second.
console(config)# authentication critical recovery max-reauth 20
authentication dynamic-vlan enable
Use the authentication dynamic-vlan enable command to enable the switch
to create VLANs dynamically when a RADIUS–assigned VLAN does not exist
in the switch. Use the no form of the command to disable this capability.
Syntax
authentication dynamic-vlan enable
no authentication dynamic-vlan enable
Default Configuration
The default value is disabled.
Command Mode
Global Configuration
User Guidelines
Dynamic VLANs are not created for multi-auth and multi-host mode
configured interfaces.
Command History
Syntax updated in version 6.6 firmware.
Example
The following example enables dynamic VLAN creation using the value
provided in the Access-Accept message.
console(config)# authentication dynamic-vlan enable