Users Guide

Dell EMC Networking CLI 99
DVMRP (Mcast) Configures DVMRP operations.
GMRP Configures GMRP and displays GMRP information.
IGMP (Mcast) Configures IGMP operations.
IGMP Proxy (Mcast) Manages IGMP Proxy on the system.
IP Helper/DHCP Relay Configures relay of UDP packets.
IP Routing (IPv4) Configures IP routing and addressing.
IPv6 Routing Configures IPv6 routing and addressing.
IP Service Level
Agreement
Monitors network performance between routers or from a
router to a remote IP device.
Loopback Interface
(IPv6)
Manages loopback configurations.
Multicast (Mcast) Manages multicasting on the system.
IPv6 Multicast Manages IPv6 multicasting on the system.
OSPF (IPv4) Manages shortest path operations.
OSPFv3 (IPv6) Manages IPv6 shortest path operations.
IPv6 Policy-Based Routing Configure and view policy-based routing for IPv6.
Router Discovery Protocol Manages router discovery operations.
Routing Information
Protocol
(IPv4)
Configures RIP activities.
Tunnel Interface (IPv6) Managing tunneling operations.
Unicast Reverse Path
Forwarding
Helps limit the problems that are caused by malformed or
spoofed IP source addresses by discarding IP packets that
lack a verifiable IP source address.
Virtual Router Manages a virtual router.
Virtual Router
Redundancy
(IPv4)
Controls virtual LAN routing.
Virtual Router
Redundancy Protocol
version 3 Commands
Provides address redundancy for both IPv4 and IPv6 router
addresses.
Table 1-1. System Command Groups (continued)
Command Group Description