Users Guide

310 Authentication, Authorization, and Accounting
How Are RADIUS Attributes Processed on the Switch?
The following attributes are processed in the RADIUS Access-Accept
message received from a RADIUS server:
25 Class Yes Yes No
26 Vendor-Specific Yes Yes Yes
27 Session-Timeout Yes No Yes
28 Idle-Timeout No No Yes
29 Termination-Action Yes No No
30 Called-Station-ID Yes No No
31 Calling-Station-ID Yes No Yes
32 NAS-Identifier Yes Yes No
40 Acct-Status-Type Acct. only Yes No
41 Acct-Delay-Time Acct. only No No
42 Acct-Input-Octets Yes No No
43 Acct-Output-Octets Yes No No
44 Acct-Session-ID Acct. only Yes No
46 Acct-Session-Time Yes Yes No
49 Acct-Terminate-Cause Yes No No
52 Acct-Input-Gigawords Yes No No
53 Acct-Output-Gigawords Yes No No
61 NAS-Port-Type Yes No Yes
64 Tunnel-Type Yes No No
65 Tunnel-Medium-Type Yes No No
79 EAP-Message Yes No No
80 Message-Authenticator Auth. only Yes No
81 Tunnel-Private-Group-ID Yes No No
168 Framed-IPv6-Address Acct. only No No
Table 9-6. Supported RADIUS Attributes (Continued)
Type RADIUS Attribute Name 802.1X User Manager Captive Portal