Users Guide

Authentication, Authorization, and Accounting 311
• REPLY-MESSAGE
Trigger to respond to the Access-Accept message with an EAP notification.
• STATE
RADIUS server state. Transmitted in Access-Request messages.
• SERVICE-TYPE
The Service-Type attribute may be validated in the Access-Accept packet
received from the RADIUS server. Only the Login-User(1),
Administrative-User(6), and Call-Check(10) values are considered valid
for Service-Type in the Access-Accept message returned from the RADIUS
server.
• SESSION-TIMEOUT
Session time-out value for the session (in seconds). Used by both 802.1x
and Captive Portal.
• TERMINATION-ACTION
Indication as to the action taken when the service is completed.
• EAP-MESSAGE
Contains an EAP message to be sent to the user. This is typically used for
MAB clients.
• VENDOR-SPECIFIC
The following vendor proprietary (vendor ID 9, sub-type 1) AV Pairs are
supported:
– shell:priv-lvl
– shell:roles
– ip:inacl={standard-access-control-list-name | extended-access-
control-list-name}
– ipv6:inacl={standard-access-control-list-name | extended-access-
control-list-name}
– ip:inacl[#number]={extended-access-control-list}
– ipv6:inacl[#number]={extended-access-control-list}
– ip:traffic-class = {pre-configured ACL name}