Users Guide

Table Of Contents
SNMP 545
Traps are enabled.
Authentication trap is enabled.
Version 1,2 notifications
Version 3 notifications
System Contact:
System Location:
Source Interface:
SNMP trap Client Source Interface.............. Default
Configuring SNMP Management Station Access
SNMP supports the ability to restrict SNMP MIB access to a single station or
a subnet of management stations. Access can be restricted to a specific
protocol version and to specific parts of the MIB for read or read-write access.
The example below restricts SNMP access to specific parts of the MIB for
SNMP requests originating from subnet 10.85.234.0/24 and using SNMP
version v2c only. An irregular community name is configured, read-only and
Community-String Group Name IP Address IP Mask
---------- ---------- ---------- -------
private DefaultWrite All All
public DefaultRead All All
Target
Address
Type Community Version UDP Port Filter
Name
TO Sec Retries
------------- --------- ------- ------- ------ ------- -------
Target
Address
Type Username Security
Level
UDP
Port
Filter
Name
TO Sec Retries
------- ------ --------
-
------- ------- ------ ------- -------