Users Guide

Security Commands 1127
Example
This command creates IAS user Philip and allows authentication for Philip on
Gi1/0/1 and Gi1/0/2 when using the IAS database for authentication.
console(config)#aaa ias-user username Philip
console(config-ias-user)#exit
console(config)#authentication dot1x default ias
console(config)#no dot1x user Philip all
console(config)#dot1x user Philip Gi1/0/1
console(config)#dot1x user Philip Gi1/0/2
show dot1x
Use the show dot1x command to display the global or interface configuration
or the statistics for an interface.
Syntax
show dot1x [detail interface-id statistics interface-id ]
• detail—Display detailed information for an interface.
• statistics—Display message tx/rx counts
•
interface-id —An interface (Ethernet) identifier. See Interface Naming
Conventions for interface representation.
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
Use this command with no parameters to display the global 802.1X
configuration. Use the statistics parameter to display statistics information
for a port.
The following configuration information is displayed for the detail parameter: