Users Guide

Security Commands 1183
ICMP Mode.................................Disable
Max ICMP Pkt Size.........................512
show system internal pktmgr
Use the show system internal pktmgr command to display the configured
CPU rate limit for unknown packets in packets per second.
Syntax
show system internal pktmgr internal control sw-rate-limit
Default Configuration
This command has no default configuration.
Command Modes
Privileged Exec mode
User Guidelines
See the rate-limit cpu command for further information on the output of this
command.
Example
console# show system internal pktmgr internal control sw-rate-limit
Inband pps global threshold 1024
storm-control broadcast
Use the storm-control broadcast command to enable broadcast storm
recovery mode for a specific interface. Use the no form of the command to
disable storm control or to return the configuration to the default.
Syntax
storm-control broadcast [{level level | rate rate | action {shutdown | trap}]
no storm-control broadcast [level| rate | action]
• level— The configured rate as a percentage of link bandwidth (Range: 0-
100)