Users Guide

138 Dell EMC Networking CLI
UDLD
spanning-tree vlan forward-
time
Configures the spanning tree forward delay time
for a specified VLAN or a range of VLANs.
GC
spanning-tree vlan hello-
time
Configures the spanning tree hello time for a
specified VLAN or a range of VLANs.
GC
spanning-tree vlan max-age Configures the spanning tree maximum age
time for a set of VLANs.
GC
spanning-tree vlan root Configures the switch to become the root
bridge or standby root bridge.
GC
spanning-tree vlan priority Configures the bridge priority of a VLAN. GC
a. For the meaning of each Mode abbreviation, see Mode Types .
Command Description Mode
a
a. For the meaning of each Mode abbreviation, see Mode Types .
udld enable (Global
Configuration)
Globally enable UDLD. UDLD must be
globally enabled and enabled on an interface to
operate.
GC
udld reset Resets (enable) all interfaces disabled by
UDLD.
PE
udld message time Configures the interval between the
transmission of UDLD probe messages on ports
that are in the advertisement phase.
GC
udld timeout interval Configures the interval for the receipt of ECHO
replies.
GC
udld enable (Interface
Configuration)
Enables UDLD on a specific interface. IC
udld port Selects the UDLD operating mode on a specific
interface.
IC
show udld Displays the global settings for UDLD. PE
Command Description Mode
a