Users Guide

Layer 3 Routing Commands 1570
Reject Routes.................................. 0
Total routes................................... 324
Best Routes (High)............................. 324 (644)
Alternate Routes............................... 0
Leaked Routes.................................. 0
RFC5549 Routes - IPv4 with IPv6 nexthop........ 0
Route Adds..................................... 1629
Route Modifies................................. 1144
Route Deletes.................................. 1305
Unresolved Route Adds.......................... 0
Invalid Route Adds............................. 0
Failed Route Adds.............................. 0
Failed Kernel Route Adds....................... 0
Hardware Failed Route Adds..................... 0
Reserved Locals................................ 0
Unique Next Hops (High)........................ 68 (132)
Next Hop Groups (High)......................... 299 (599)
ECMP Groups (High)............................. 290 (585)
ECMP Routes.................................... 256
Truncated ECMP Routes.......................... 34
ECMP Retries................................... 26400
Routes with 1 Next Hop......................... 34
Routes with 2 Next Hops........................ 285
Routes with 3 Next Hops........................ 5
console#show ip route static
Route Codes: R - RIP Derived, O - OSPF Derived, C - Connected, S - Static
B - BGP Derived, E - Externally Derived, IA - OSPF Inter Area
E1 - OSPF External Type 1, E2 - OSPF External Type 2
N1 - OSPF NSSA External Type 1, N2 - OSPF NSSA External Type 2
S U - Unnumbered Peer, L - Leaked Route
No default gateway is configured.
S 10.0.0.0/8 [1/0] via Vl10
S U 6.1.0.6/32 [0/0] via Vl20
S U 6.2.0.6/32 [0/0] via Vl20
The following example shows a tracked route.
console#show ip route track-table
ipv6 route 0.0.0.0 0.0.0.0 10.130.167.129 track 10 state is [up]
show ip route preferences
Use the show ip route preferences command to display the default route
preference value for each origin.