Users Guide

Layer 3 Routing Commands 1685
Example
console(config)#ipv6 pim ssm ff1e::/64
show ipv6 pim
Use the show ipv6 pim command to display global status of IPv6 PIMSM and
its IPv6 routing interfaces.
Syntax
show ipv6 pim
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
There are no user guidelines for this command.
Example
console(config)#show ipv6 pim
PIM Mode....................................... Sparse
Interface Interface-Mode Operational-Status
--------- -------------- ------------------
Vl1 Enabled Operational
show ipv6 pim bsr-router
Use the show ipv6 pim bsr-router command to display the bootstrap router
(BSR) information.
Syntax
show ipv6 pim bsr-router { candidate | elected }