Users Guide

Dell EMC Networking CLI 171
BGP Routing Policy
show ip bgp vpn4 Displays the VPNv4 address information from
the BGP table.
PE,
GC
template peer Creates a BGP peer template and enters peer
template configuration mode.
BR
timers bgp Configures the default keepalive and hold
timers that BGP uses for all neighbors unless
specifically overridden by the neighbor timers
command.
BR
timers policy-apply delay Configures the delay after which any change to
the global or per BGP neighbor
inbound/outbound policies are applied.
BR
graceful-restart Enables the graceful restart and the graceful
restart helper capability.
BR
graceful-restart-helper Enables the graceful restart helper capability. BR
a. For the meaning of each Mode abbreviation, see Mode Types .
Command Description Mode
a
ip as-path access-list Create an AS path access list. GC
ip bgp-community new-
format
Displays BGP standard communities in AA:NN
format.
GC
ip community-list Creates or configures a BGP community list. GC
ip prefix-list Creates a prefix list or adds a prefix list entry. GC
ip prefix-list description Applies a text description to a prefix list. GC
ipv6 prefix-list Creates an IPv6 prefix list or add an IPv6 prefix
list entry.
GC
match as-path Adds criteria that matches BGP autonomous
system paths against an AS path access list to a
route map.
RM
match community Configures a route map to match based on a
BGP community list.
RM
Command Description Mode
a