Users Guide

Layer 3 Routing Commands 1856
Syntax
show ipv6 ospf interface {vlan vlan-id | brief [vrf vrf-name ]}
•
vlan-id — Valid VLAN ID. Range is 1-4093.
• brief — Displays a snapshot of configured interfaces.
•
vrf-name — The name of an existing VRF instance.
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes, VRF Configuration
User Guidelines
This command has no user guidelines.
Example
The following example displays OSPF interface VLAN information.
console#show ipv6 ospf interface vlan 10
IPv6 Address............................. FE80::2FC:E3FF:FE90:44
ifIndex.................................. 634
OSPF Admin Mode.......................... Enable
OSPF Area ID............................. 0.0.0.1
Router Priority.......................... 1
Retransmit Interval...................... 5
Hello Interval........................... 10
Dead Interval............................ 40
LSA Ack Interval......................... 1
Iftransit Delay Interval................. 1
Authentication Type...................... None
Metric Cost.............................. 10 (computed)
OSPF Mtu-ignore.......................... Disable
OSPF Interface Type...................... broadcast
State.................................... backup-designated-router
Designated Router........................ 1.1.1.1
Backup Designated Router................. 2.2.2.2
Number of Link Events.................... 46
Command History
Syntax to support VRFs added in version 6.7.0 firmware.