Users Guide

Layer 3 Routing Commands 1894
Syntax
show ip rip interface vlan vlan-id
• vlan-id — Valid VLAN ID.
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
This command has no user guidelines.
Example
The following example displays information related to the VLAN 15 RIP
interface.
console#show ip rip interface vlan 15
Interface...................................... 15
IP Address..................................... -----
Send version................................... RIP-2
Receive version................................ Both
RIP Admin Mode................................. Disable
Link State..................................... -----
Authentication Type............................ MD5
Authentication Key............................. “pass123”
Authentication Key ID.......................... 35
Bad Packets Received........................... -----
Bad Routes Received............................ -----
Updates Sent................................... -----
show ip rip interface brief
Use the show ip rip interface brief command to display general information
for each RIP interface. For this command to display successful results routing
must be enabled per interface (i.e. ip rip).
Syntax
show ip rip interface brief