Users Guide

Switch Management Commands 1960
Example
console#
console#configure
console(config)#boot host dhcp
console(config)#no boot host dhcp
boot host retry-count
The boot host retry-count command sets the number of attempts to
download a configuration. Use the no form of this command to reset the
number of attempts to download a configuration to the default.
Syntax
boot host retry-count count
no boot host retry-count
•
count —The number of attempts to download a configuration (Range:
1–6).
Default Configuration
The default number of configuration download attempts is 6.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines
Example
console#
console#configure
console(config)#boot host retry-count 5
console(config)#no boot host retry-count
show auto-copy-sw
Use the show auto-copy-sw command to display Stack Firmware
Synchronization configuration status.