Users Guide

Switch Management Commands 1995
Command History
Command introduced in version 6.6.0 firmware.
Example
The following shows an example of the CLI command.
(Routing) #show port all | begin “1/1”
1/1 Enable Down Disable N/A N/A
1/2 Enable Down Disable N/A N/A
1/3 Enable Down Disable N/A N/A
1/4 Enable Down Disable N/A N/A
1/5 Enable Down Disable N/A N/A
1/6 Enable Down Disable N/A N/A
(Routing) #
show xxx |section “ string ”
The command xxx is executed and the output is filtered to show only lines
included within the section(s) identified by lines containing the “string”
match and ending with the first line containing the default end-of-section
identifier (i.e. “exit”).
Syntax
show xxx|section “string”
Default Configuration
This command has no default configuration.
User Guidelines
This command has no user guidelines.
Command History
Command introduced in version 6.6.0 firmware.
Example
The following shows an example of the CLI command.