Users Guide

Switch Management Commands 2013
-rw- 0 Jan 28 2022 23:05:12 olog0.txt
-rw- 2497 Jan 21 2022 22:37:38 fastpath.cfg
Total Size: 1001914368
Bytes Used: 128319488
Bytes Free: 873594880
erase
Use the erase command to erase the startup configuration, the backup
configuration, or the backup image, or a Dell-supplied application.
Syntax
erase {filename | startup-config | backup | backup-config | application
filename }
• filename—The name of a file on the flash drive.
• startup-config—Erases the contents of the startup configuration file.
• backup—Erase the backup image.
• backup-config—Erases the backup configuration.
• application
filename —Erases a Dell-supplied application.
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode
User Guidelines
This command is not supported on USB drives.
filedescr
Use the filedescr command to add a description to a switch image. Use the
no version of this command to remove the description from the filename.