Users Guide

Switch Management Commands 2050
Syntax
show ip dhcp binding [all | {[vrf vrf-name ] [ address ]}]
•
vrf-name — The name of an existing VRF instance.
•
address —A valid IPv4 address
Default Configuration
The command has no default configuration.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
This command has no user guidelines.
Example
console(config)# show ip dhcp binding
IP address Hardware Address Expires Type client-DUID
----------- ----------------- --------- ----- --------------
10.10.10.3 00:0e:c6:88:0e:98 00:23:56 Auto
00:01:01:02:03:04:05:06:00:0e:c6:88:0e:98
Command History
Syntax to support VRFs added in version 6.7.0 firmware.
show ip dhcp conflict
Use the show ip dhcp conflict command in User Exec mode to display
DHCP address conflicts for all relevant interfaces or a specified interface. If
an interface is specified, the optional statistics parameter is available to view
statistics for the specified interface.
Syntax
show ip dhcp conflict [ address ]
•
address —A valid IPv4 address for which the conflict information is
desired.