Users Guide

Switch Management Commands 2110
Example
The following example specifies the default authentication method when
accessing a higher privilege level console.
console(config)# line console
console(config-line)# enable authentication default
exec-banner
Use the exec-banner command to enable exec banner on the console, telnet
or SSH connection. To disable, use the no form of the command.
Syntax
exec-banner
no exec-banner
•
MESSAGE — Quoted text
Default Configuration
This command has no default configuration.
Command Mode
Line Configuration
User Guidelines
The exec banner can consist of multiple lines. Enter a quote to complete the
message and return to configuration mode.
Example
console(config-telnet)# no exec-banner
exec-timeout
Use the exec-timeout command in Line Configuration mode to set the
interval that the system waits for user input before timeout. To restore the
default setting, use the no form of this command.