Users Guide

212 Dell EMC Networking CLI
Line
server Configures a HiveAgent server (HiveManager
NG) and enter HiveAgent server configuration
mode.
HAC
debug Enables HiveAgent debug capability. HAC
enable Enables a HiveAgent server. HAC
proxy-ip-address Configures a proxy server to be used to contact
the HiveManager NG.
HAC
source-interface vlan-id Assigns a source interface which HiveAgent
obtains the IP address used as the source IP
address in packets addressed to the
HiveManager NG
HAC
url Configures the URL to reach on HiveManager
NG.
HAC
show hiveagent debug Use to view information on HiveAgent debug
configuration.
PE,
GC
show hiveagent source-
interface
Displays the configured HiveAgent source
interface.
PE,
GC
show hiveagent status Displays information on the HiveAgent
configuration.
PE,
GC
show eula-consent hiveagent Reviews the EULA details. PE,
GC
a. For the meaning of each Mode abbreviation, see Mode Types .
Command Description Mode
a
accounting Applies an accounting method to a line config. LC
authorization Applies a command authorization method to a
line config.
LC
enable authentication Specifies the authentication method list when
accessing a higher privilege level from a remote
telnet or console.
LC
Command Description Mode
a