Users Guide

Switch Management Commands 2133
Command History
Command introduced in version 6.7.0 firmware.
show mka sessions
Use this command to display a summary of all MACsec sessions or to display
a session on a specified interface.
Syntax
show mka sessions [ interface interface-id [detail]]
•
interface-id — Displays status information for active MKA sessions on
an interface.
• detail — Displays detailed information about the active MKA sessions
on the specified interface.
Command Mode
Privileged Exec mode, Global Configuration mode and all sub-modes
User Guidelines
The output field descriptions for the show mka session command are the
following:
Field Description
Interface The physical interface on which the MKA session is active.
Port ID The MACsec logical port identifier.
Local-TxSCI The MAC address of the physical interface concatenated with
the 16-bit Port ID.
Peer-RxSCI The MAC address of the interface of the peer concatenated
with the peer 16-bit Port ID.
Policy-name The name of the MKA policy.
MACsec Peers The number of MACsec peers.
Key Server Status The key server. Has value Y for Yes if the MKA session is the
key server, otherwise N for No.