Users Guide

Switch Management Commands 2429
recover
The recover command is implemented as a u-boot environment variable. It
mounts the USB stick, copies the image from the USB root level directory
into RAM, and executes the image.
Syntax
recover <image-name>
• image-name—The name of a valid firmware stack file located in the root
of the mounted USB stick.
Default Configuration
This command has no default configuration.
Command Mode
u-boot mode
User Guidelines
There is no validation of the image.
There is no validation that the image exists on the USB stick (other than the
copy fails). Incorrect use of this capability can stop a switch. Stopped switches
are not recoverable. Recovery of the switch from the booted image is as
needed. No guidelines are provided.