Users Guide

Using the CLI 260
Track
Configuration
Mode
From Global
Configuration
mode, use the track
object-number ip
sla operation-
number command.
Switch (config-track)#
To exit to Global
Configuration
mode, use the
exit command,
or press
<Ctrl>+<Z>
to Privileged
Exec mode.
IP SLA
Configuration
Mode
From Global
Configuration
mode, use the ip sla
operation-number
command.
Switch (config-ip-sla)#
To exit to Global
Configuration
mode, use the
exit command,
or press
<Ctrl>+<Z>
to Privileged
Exec mode.
IP SLA ICMP
ECHO
Configuration
Mode
From IP SLA
Configuration
mode, use the
icmp-echo
destination-ip-
address command.
Switch (config-ip-sla-echo)#
To exit to Global
Configuration
mode, use the
exit command,
or press
<Ctrl>+<Z>
to Privileged
Exec mode.
ERSPAN Source
Session
Configuration
From Global
Configuration
mode, use the
monitor session
type erspan-source
command to
configure an
ERSPAN source
session.
console (config-erspan-src)#
To exit to Global
Configuration
mode, use the
exit command,
or press
<Ctrl>+<Z>
to Privileged
Exec mode.
Table 2-5. Navigating CLI Command Modes
(continued)
Command Mode Access Method Command Prompt Exit or Access
Previous Mode