Users Guide

Layer 2 Switching Commands 324
Default Configuration
This command has no default configuration.
Command Mode
User Exec, Privileged Exec mode, Global Configuration mode and all
Configuration submodes
User Guidelines
Use the show mac address-table multicast to display multicast MAC address
entries along with forbidden multicast MAC entries.
Example
In this example, all classes of entries in the mac address-table are displayed.
console#show mac address-table
Aging time is 300 Sec
Vlan Mac Address Type Port
---- ---------------- ---------- -----------
0 001E.C9AA.AE19 Management CPU Interface
1 001E.C9AA.AC19 Dynamic Gi1/0/21
1 001E.C9AA.AE1B Management Vl1
10 001E.C9AA.AE1B Management Vl10
90 001E.C9AA.AE1B Management Vl90
Total MAC Addresses in use: 5
show mac address-table address
Use the show mac address-table address command in User Exec or Privileged
Exec mode to display all entries in the bridge-forwarding database for the
specified MAC address.
Syntax
show mac address-table address mac-address [interface interface-id ] [vlan
vlan-id ]
•
mac-address — A MAC address.