Users Guide

Layer 2 Switching Commands 465
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec, Global Configuration mode and all Configuration submodes
User Guidelines
• Level—The maintenance association level
• SVID—The service identifier
• MPID—The maintenance endpoint identifier
• DefRDICcm—A remote MEP reported the RDI bit in a CCM.
• DefMACStatus—Some remote MEP reported its Interface Status TLV as
something other then isUp.
• DefRemoteCCM—The MEP did not receive valid CCMs from at least
one of the remote MEPs
• DefErrorCCM—The MEP has received at least one invalid CCM whose
CCM interval has not yet timed out.
• DevXconCCM—The MEP has received at least one CCM from either
another MAID or a lower MD level whose CCM interval has not yet timed
out.
Example
console#show ethernet cfm errors
----- ---- ---- --------- ------------ ------------ ----------- ----------
Level SVID MPID DefRDICcm DefMACStatus DefRemoteCCM DefErrorCCM DefXconCCM
----- ---- ---- --------- ------------ ------------ ----------- ----------
show ethernet cfm domain
Use the show ethernet cfm domain command to display the configured
parameters in a maintenance domain.
Syntax
show ethernet cfm domain {brief | domain-id }