Users Guide

Layer 2 Switching Commands 618
The receive function accepts incoming LLDPDU frames and stores
information about the remote stations. Both local and remote data may be
displayed by the user interface and retrieved using SNMP as defined in the
LLDP MIB definitions. The component maintains one remote entry per
physical network connection.
The LLDP component manages a number of statistical parameters
representing the operation of each transmit and receive function on a per-port
basis. These statistics may be displayed by the user interface and retrieved
using SNMP as defined in the MIB definitions.
clear lldp remote-data
Use the clear lldp remote-data command to delete all LLDP peer
information.
Syntax
clear lldp remote-data
Default Configuration
By default, data is removed only on system reset.
Command Mode
Privileged Exec mode
User Guidelines
This command has no user guidelines.
Example
The following example displays how to clear the LLDP remote data.
console#clear lldp remote-data
clear lldp statistics
Use the clear lldp statistics command to reset all LLDP statistics.