Users Guide

Layer 2 Switching Commands 683
The following table explains the output parameters.
Examples
console#show mvr interface
Port Type Status Immediate Leave
--------- --------------- --------------------- --------------------
Gi1/0/9 RECEIVER ACTIVE/inVLAN DISABLED
console#show mvr interface gi1/0/9
Type: RECEIVER Status: ACTIVE Immediate Leave: DISABLED
console#show mvr interface gi1/0/23 members
235.0.0.1 STATIC ACTIVE
console#show mvr interface gi1/0/23 members vlan 12
235.0.0.1 STATIC ACTIVE
235.1.1.1 STATIC ACTIVE
show mvr traffic
Use the show mvr traffic command to display global MVR statistics.
Error Completion Message MVR disabled
Parameter Description
Port Interface number
Type The MVR port type. It can be None,
Receiver, or Source type.
Status The interface status. It consists of two
characteristics:
1 active or inactive indicating if port is
forwarding.
2 inVLAN or notInVLAN indicating if the
port is part of any VLAN
Immediate Leave The state of immediate mode. It can be
enabled or disabled.
Message Type Message Description