Users Guide

Layer 2 Switching Commands 732
Destination RSPAN VLAN : None
IP access-group : a1
MAC access-group : None
The following example shows the detailed status of a VLAN session on source
switch, where session is span across multiple switches.
console# show monitor session 1 detail
Session : 1
Type : Remote Destination Session
Source Ports :
RX Only : None
TX Only : None
Both : None
Source VLANs :
RX Only : 100
Source RSPAN VLAN : None
Destination Ports : None
Dest RSPAN VLAN : 999
The following example shows the detailed status of a VLAN session on
destination switch, where session is span across multiple switches.
console# show monitor session 1 detail
Session : 1
Type : Remote Destination Session
Source Ports :
RX Only : None
TX Only : None
Both : None
Source VLANs :
RX Only : None
Source RSPAN VLAN : 999
Destination Ports : Gi1/0/15
Dest RSPAN VLAN : None
show vlan remote-span
Use this command to display the RSPAN VLAN IDs.
Syntax
show vlan remote-span