Users Guide

Layer 2 Switching Commands 795
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
If the interface is specified, the IEEE 802.1p mapping table of the interface is
displayed. If omitted, the global configuration settings are displayed.
The following table lists the parameters in the example and gives a
description of each.
Example
The following example displays the default 802.1p traffic class mapping and
user priorities.
console#show classofservice dot1p-mapping
User Priority Traffic Class
------------- ---------------
0 1
1 0
2 0
3 1
4 2
5 2
6 3
7 3
show classofservice ip-dscp-mapping
Use the show classofservice ip-dscp-mapping command to display the
current IP DSCP mapping to internal traffic classes for a specific interface.
Syntax
show classofservice ip-dscp-mapping
Parameter Description
User Priority The 802.1p user priority value.
Traffic Class The traffic class internal queue identifier to which
the user priority value is mapped.