CLI Guide

Security Commands 1005
acct-port
Use the acct-port command to set the port on which the RADIUS accounting
server listens for connections. Use the no form of this command to reset the
port to the default.
Syntax
acct-port port
no acct-port
• port — The layer 4 port number of the accounting server (Range: 1 -
65535).
Default Configuration
The default value of the port number is 1813.
acct-port primary radius server source-ip
attribute 6 priority radius server source-
interface
attribute 8 radius server attribute 4 radius server timeout
attribute 25 radius server attribute 6 radius server vsa send
authentication
attribute 31 radius server attribute 8 retransmit
attribute 168 radius server attribute 25 show aaa servers
authentication event fail
retry
radius server attribute mac
format
show radius statistics
auth-port radius server attribute 168 source-ip
automate-tester radius server deadtime timeout
deadtime radius server usage authmgr
key radius server key
–
msgauth radius server retransmit –