CLI Guide

Security Commands 1010
Command Mode
RADIUS Server Configuration
User Guidelines
Use this command to override the format of the Calling-Station-ID MAC
address sent in authentication Access-Request for ports configured for
authentication host mode single-host, multi-auth, multi-domain or MAB
authentication for a specific RADIUS server.
This command is only supported for 802.1X authentication.
This command overrides the global configuration for attribute 31 (Calling-
Station-ID). Use the mab request format command to control the formatting
of the User-Name (1) attribute.
Command History
Introduced in version 6.3.0.1 firmware. Description update in release 6.5.0 to
remove the User-Name formatting control.
Example
This example configures the format of the MAC address sent in Access-
request to IETF lower case for the RADIUS server at address 1.2.3.4.
console(config)#radius server auth 1.2.3.4
console(config-auth-radius)# attribute 31 mac format ietf lower-case
attribute 32
Use this command to configure the format of the NAS-Identifier sent to the
RADIUS server in Access-Request and Acct-Request messages. Use the no
form of the command to return the MAC address format to the default.
Syntax
attribute 32 include-in-access-request [format]
no attribute 32 include-in-access-request
• format—A text string of 2 to 128 characters and may include the
following format specifiers:
%m : NAS MAC address