CLI Guide

Security Commands 1067
802.1x Advanced Features
dot1x eapolflood
This command enables the flooding of received IEEE 802.1x frames in the
VLAN. Use the no form of the command to return the processing of EAPOL
frames to the default.
Syntax
dot1x eapolflood
no dot1x eapolflood
Default Configuration
By default, the switch does not forward received IEEE 802.1x frames, even if
802.1x is not enabled on the switch. This is the default behavior required by
IEEE 802.1x-2010.
Command Mode
Global Configuration mode
dot1x max-reauth-req – show dot1x users
dot1x max-req auth-type clear authentication
authentication–history
authentication max-users client authentication event no-
response
authentication port-control ignore authentication event fail
– port show dot1x advanced
authentication periodic
––
authentication event no-
response
authentication event fail show dot1x advanced
dot1x timeout guest-vlan-
period
––